3750 / PNEUMATIC ACTUATOR

FEATURES

• FAF3750 Pneumatic Actuator is a control instrument maintains the automation feature in valve control through converting the power obtained from pressurized air installation to mechanical movement.
• Actuator selection is made based on actuator type, torque requirements and connection dimensions.
• Actuator connection dimensions are manufactured according to ISO 5211 standard.
• Pneumatic actuators are manufactured with aluminum extrusion body, stainless steel stem, NBR rubber sealing components.
• General working pressure is set to 6 bars
  It is advised to receive support from FAF Valve technical staff while selecting actuators to be used with our valves.
• Pneumatic actuators are divided into two as quarter turn (90 degree) actuators and linear movement actuators.
• Quarter turn Pneumatic Actuators
  Works through the linear movement of the piston inside the body converted to angular movement.
• On request, quarter turn pneumatic actuators can be manufactured with stroke adjusted (proportional).
• It has two types; double acting or single acting (spring return).
• Can be used with ball, butterfly and plug valves
  Linear movement actuators, piston type pneumatic actuators..
• Works through the transfer of linear movement of the pneumatic piston exposed to pressure to the valve stem. Manufactured according to the stroke distance specified by valve type and feature.
• It has two types; double acting or single acting (spring return).
• Can be used with gate and knife gate valves.